
4
DSP2-200 AMPLIFIER
INSTALLATION USER MANUAL
Quick Setup Guide
About
The DSP2-200 provides uncolored, clean amplification to loudspeakers rated
from 4-ohms and up. It contains preset DSP curves for Origin Acoustics products
and is ready for installation into a rack or inside a cabinet.
Placement
We recommend at least ten inches of clearance on both the left and right sides of
the amplifier. The included rack-wings will ensure proper ventilation in the rack.
Alternatively, you can use the included feet to place this module in a ventilated
area without a rack.
Connections
The amplifier has line-level RCA inputs and Optical. Both of these options
also have signal pass-through, for connection to another amplifier. Only one
input can be used at once. The block style connector can accept up to 12g wire
securely.
We recommend 12-14g wire for this amplifier.
Power
Please do not place this amplifier in wet conditions or where it could become
splashed with water. For additional protection, the amplifier will shut-down at
158-degrees Fahrenheit. The amplifier will also shut-down after twenty-minutes
without use. The amplifier does have optional auto-sense and will turn back-on
upon receiving a signal.
Bridge
This two-channel 200w amplifier can be bridged into 360w mono by utilizing the
switch on the rear. Please ensure the amplifier is switched in the correct mode
before powering on with loudspeakers attached.
Содержание DSP2-200
Страница 1: ...Installation Manual DSP2 200 ...