Origin Acoustics D80, Руководство по установке

Страница: 12 / 22

10
Director Collection™ Manual
template, check the Specifications section for cutout sizes.) If you’re unsure
on whether there may be obstacles (such as pipes or wires) where you plan on
installing the speaker, drill a ⅛ inch hole in the center of the circle, then put a bent
coat hanger through the hole to feel around. Use a keyhole or drywall saw to cut
the hole.
Adjust the clips so that they’re positioned at the top of the rail. If they’re not al-
ready there you can do this by pushing the metal release tabs on the inside of the
rail and pulling the clips to the top of the rails. Insert the bayonet ring into the hole
in the ceiling by gently bending the rails inward. Reach inside the bayonet ring and
push the clips down so that the bayonet ring is firmly in place, but not too tight. If
the bayonet ring needs to be removed, reach inside and push the release tabs to
reset the clips The bayonet ring can now be taken out.
4. Installing the Bayonet Ring
BZ68 2019
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S O R I G I N
®
(Unlocked)
Bayonet Ring
Push Tabs
Against Rail