5
Permissible radial load and permissible axial load
The radial load and the axial load on the gearhead output shaft must be
kept under the permissible values listed below.
Note
Failure due to fatigue may occur when the gearhead bearings
and output shaft are subject to repeated loading by a radial or
axial load that is in excess of the permissible limit.
10 mm (0.39 in.)
20 mm (0.79 in.)
Distance from output shaft end
Axial load
Radial load
Gear
ratio
Motor shaft
rotation speed
*
(r/min)
Permissible radial load [N (lb.)]
Permissible
axial load
[N (lb.)]
Distance from output shaft end
10 mm (0.39 in.) 20 mm (0.79 in.)
5
1500
521 (117)
663 (149)
39 (8.7)
3000
365 (82)
464 (104)
27.3 (6.1)
3600
261 (58)
332 (74)
19.5 (4.3)
10
1500
977 (210)
1244 (270)
88 (19.8)
3000
684 (153)
871 (195)
61.6 (13.8)
3600
489 (110)
622 (139)
44.0 (9.9)
20
1500
1243 (270)
1582 (350)
177 (39)
3000
870 (195)
1107 (240)
124 (27)
3600
622 (139)
791 (177)
88.5 (19.9)
30
1500
1824 (410)
2280 (510)
255 (57)
3000
1277 (280)
1596 (350)
179 (40)
3600
912 (200)
1140 (250)
128 (28)
50
1500
2032 (450)
2540 (570)
275 (61)
3000
1422 (310)
1778 (400)
193 (43)
3600
1016 (220)
1270 (280)
138 (31)
100
1500
2888 (640)
3496 (780)
422 (94)
3000
2022 (450)
2447 (550)
295 (66)
3600
1444 (320)
1748 (390)
211 (47)
200
1500
3483 (780)
4216 (940)
461 (103)
3000
2438 (540)
2951 (660)
323 (72)
3600
1742 (390)
2108 (470)
231 (51)
300
450
1500
4461 (1000)
5174 (1160)
686 (154)
3000
3123 (700)
3622 (810)
480 (108)
3600
2231 (500)
2587 (580)
343 (77)
600
1200
1500
5245 (1180)
5921 (1330)
824 (185)
3000
3672 (820)
4145 (930)
577 (129)
3600
2623 (590)
2961 (660)
412 (92)
*
The speed control range is 80 to 3600 r/min.
Connection
Connecting the motor and driver
Connect the connection cable (sold separately) to the motor and driver.
There are two types of connection cables which cable leading directions
are different.
The following explains as an example of "leading in direction of
output shaft."
Connection cable
Motor
Leading in opposite direction of output shaft
Leading in direction of output shaft
[ Cable leading direction ]
The connection procedures are
explained as an example of this cable
leading direction.
To driver
Note
Do not apply a strong force on the locking lever of the
connector for motor connection. Applying a strong force on
the locking lever may cause damage.
Locking lever