Handling the product without observing the instructions that accompany a "CAUTION"
symbol may result in injury or property damage.
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
Thermostat for fan
AM2-XA1
Thermostat for heater
AM2-XB1
HF-3150-6
•
Do not use the product in explosive or corrosive environments, in the presence of
flammable gases, locations subjected to splashing water, or near combustibles.
•
Only qualified and educated personnel should be allowed to perform installation,
connection, operation and inspection of the product.
•
Do not transport, install, connect or inspect the product while the power is supplied.
Always turn the power off before carrying out these operations.
•
Connect the product securely according to the wiring diagram.
•
Do not disassemble or modify the product.
Refer all such internal inspections and repairs to the branch or sales office from
which you purchased the product.
•
Do not use the product beyond its specifications.
•
Use this product in combination with fans or heaters of Oriental Motor.
•
Provide safety measures according to the instructions of the connected device.
•
To dispose of the product, disassemble it into parts and components as much as
possible and dispose of individual parts/components as industrial waste.
The precautions described below are intended to ensure the safe and correct use of
the product, and to prevent the customer and others from exposure to the risk of injury.
Use the product only after carefully reading and fully understanding these instructions.
Handling the product without observing the instructions that accompany a "Warning"
or "Caution" symbol may result in fire, electric shock, injury or equipment damage.
The temperature at which the fan turns ON
is set to 40 °C (104 °F), and the temperature
inside the enclosure rises and the fan
operates:
The temperature at which the heater turns
OFF is set to 10 °C (50 °F), and the
temperature inside the enclosure drops and
the heater operates:
WARNING
CAUTION
Safety precautions
Only qualified and educated personnel should work with the product.
Use the product correctly after thoroughly reading the section "Safety precautions".
The product described in this manual has been designed and manufactured to be
incorporated in general industrial equipment. Do not use for any other purpose.
Oriental Motor Co., Ltd. is not responsible for any damage caused through failure to
observe this warning.
Operation flow (image)
Handling the product without observing the instructions that accompany a "WARNING"
symbol may result in serious injury or death.
Installation
If the product does not operate normally, refer to this section, and check in the order
of
1
→
2
.
1. Operation of contact
Check the condition of the contact by rotating the temperature-setting dial at room
temperature.
•
Thermostat for fan: Turn the setting dial from "contact ON [0 °C (32 °F)]" to "contact
OFF [60 °C (140 °F)]". If the product is normal, the contact will be OFF.
•
Thermostat for heater: Turn the setting dial from "contact OFF [0 °C (32 °F)]" to
"contact ON [60 °C (140 °F)]". If the product is normal, the contact will be ON. If the
contact "ON" state or contact "OFF" state is continued when the setting dial is set
to any of the temperature, contact your nearest Oriental Motor sales office.
2. Operating temperature
The temperature difference against the setting temperature of this product is ±5 °C
(±9 °F) [when setting to 23 °C (73 °F)]. Check the setting temperature and ambient
temperature.
Troubleshooting and remedial actions
■
Location for installation
•
Indoors
•
Operating ambient temperature: –35 to
+
80 °C (–31 to
+
176 °F) (non-freezing)
•
Operating ambient humidity: 95% or less (non-condensing)
•
Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or liquid
•
Area not exposed to direct sun
•
Area free of excessive amount of dust, iron particles or the like
•
Area not subject to splashing water (rain, water droplets), oil (oil droplets) or other
liquids
•
Area not subject to continuous vibration or excessive shocks
•
Area free of excessive electromagnetic noise (from welders, power machinery, etc.)
•
Area free of radioactive materials, magnetic fields or vacuum
Mount the product to a 35 mm (1.38 in.) width DIN rail.
■
Method of installation
•
Fan
•
Heater
•
Do not drop the product. Dropping impact may cause damage to the product.
•
Do not install the product in such a way that the ventilation at the slit is blocked.
•
Do not let foreign objects enter the inside of the product.
Note
Standards and CE Marking
This product is recognized by UL and certified by VDE.
This product is affixed the CE Marking under the Low Voltage Directive,
EMC Directive, and RoHS Directive.
Overvoltage category
Ⅱ
, Pollution degree 2, Class
Ⅱ
equipment
（
For EN standards
）
•
Installation conditions
Specification
Model
Oriental Motor model name
Temperature setting range
Switch temperature difference
Reset (differential)
Type of Sensor
Color
Display unit
Setting dial
ON when activated,
OFF when recovered
OFF when activated,
ON when recovered
0 to
+
60 °C (32 to
+
140 °F)
±
5 °C (
±
9 °F) [When setting to 23 °C (73 °F)]
°C
Operating temperature
–
4 °C
±
3 °C (7 °F
±
5 °F)
Thermo bimetal
AM2-XA1
AM2-XB1
Thermostat for fan
(Normally open)
Blue
Thermostat for heater
(Normally closed)
Red
Published in November 2021
Applicable standards
Certification
body
Oriental Motor
model name
Manufacturer: STEGO Elektrotechnik GmbH
AM2-XA1
Type STS 011
Model No. 01116.0-00
Manufacturer
model name
AM2-XB1
Type STO 011
Model No. 01115.0-00
UL 60730-1
UL 60730-2-9
CSA E60730-1
CSA E60730-2-9
EN 60730-1
EN 60730-2-9
UL
VDE
Technical Support Tel:800-468-3982
8:30am EST to 5:00pm PST (M-F)
www.orientalmotor.com
• Please contact your nearest Oriental Motor office for further information.
Schiessstraße 44, 40549 Düsseldorf, Germany
Technical Support Tel:00 800/22 55 66 22
www.orientalmotor.de
Unit 5 Faraday Office Park, Rankine Road,
Basingstoke, Hampshire RG24 8QB UK
Tel:+44-1256347090
www.oriental-motor.co.uk
Tel:+33-1 47 86 97 50
www.orientalmotor.fr
Tel:+39-02-93906347
www.orientalmotor.it
4-8-1Higashiueno,Taito-ku,Tokyo 110-8536
Japan
Tel:+81-3-6744-0361
www.orientalmotor.co.jp
Tel:400-820-6516
www.orientalmotor.com.cn
Tel:0800-060708
www.orientalmotor.com.tw
Singapore
Tel:1800-842-0280
www.orientalmotor.com.sg
Tel:1800-806-161
www.orientalmotor.com.my
Tel:1800-888-881
www.orientalmotor.co.th
Korea
Tel:080-777-2042
www.inaom.co.kr
Tel:1800-120-1995 (For English)
1800-121-4149 (For Hindi)
www.orientalmotor.co.in
Copyright ORIENTAL MOTOR CO., LTD. 2013
•
Unauthorized reproduction or copying of all or part of this Operating Manual is prohibited.
•
Characteristics, specifications and dimensions are subject to change without notice.
•
is registered trademarks or trademarks of Oriental Motor Co., Ltd., in
Japan and other countries.
20 °C
30 °C
40 °C
Fan ON
Fan OFF
Time
Operation
Operation
Time
0 °C
10 °C
20 °C
Heater OFF
Heater ON
•
If connecting two or more fans (or heaters), use a terminal block for relay.
Do not connect lead wires from multiple units directly to the thermostat.
•
When using the product in the environment where the operating ambient
temperature is 70 °C (158 °F) or more, use a heat-resistant cable for connection.
Connection
Connect the thermostat between the fan (or heater) and power supply.
The terminals of the thermostat are the solderless type. Connect using the solid wire
or rod terminal.
Applicable wire:
AWG18 to 13 (0.75 to 2.5 mm
2
)
Strip Length
：
5 mm (0.2 in.)
Screw-tightening torque of terminal block:
1 N∙m (142 oz-in) or less
Power
supply
Fan or heater
1st
2nd
Reset
4 °C
Reset
4 °C
