Getting Started
To use your
Oricore ST-66
Bluetooth Headset,please follow the steps below:
1.
Ensure your headset is fully charged
2.
Pair your charged headset with a Bluetooth-enabled mobile phone
Charging Your Headset
The headset comes with a built-in rechargeable battery. Prior to using
the headset for the first time, it is recommended to fully charge the
battery first.
Insert the charger plug into the headset’s charging socket (refer to
figure3
)
and plug the mains charger to an AC wall outlet. The battery icon
showed on the headset will be displayed during charging.
IMPORTANT: Charging indication will be delayed for a few seconds if the
headset has not been used for a long time or the battery is drained.
Normal Charging Time
If takes about three hours to fully charge the battery. When the battery is
fully charged, the battery icon will stay on and indicate it is “
charging complete
”. Unplug
the mains charger from the AC wall outlet and the charger plug form the
headset. Press and hold the MFB (refer to
Figure 1
) for 5-6 seconds to
turn on the headset. Please refer to “Turning Your Headset On and Off”
on the next page for further details.
Talk and Standby Time
A fully charged battery can offer up to
10
hours of talk time and up to
180
hours of standby time. When there are no calls
the headset should remain turned on in standby mode.
