21
Operations
The Repeater Access function can be set (from channel 1 to 8
and 41 to 48) used by local repeater stations. When activated,
your radio will receive the Repeater on its specific channel (all
repeater outputs are on channel 1 to 8 and 41 to 48) but transmit
to the repeater channel 31 to 38 and 71 to 78 (Factory default is
set to On for all repeater channels).
e.g.
CH01 on Duplex mode will receive on CH01 but transmit on CH31.
CH02 on duplex mode will receive on CH02 but transmit on CH32.
If you transmit on CH01 duplex mode, you are actually
transmitting on CH31; the repeater station down converts your
signal and retransmits on CH01.
Your transceiver allows you to pre-select Duplex operation
individually on each channel.
CH and Number Simplex mode Transmit/
Receiver Frequency (MHz)
Duplex Mode Transmit/
Receiver Frequency(MHz)
1
476.425
477.175 CH31
2
476.450
477.200 CH32
3
476.475
477.225 CH33
4
476.500
477.250 CH34
5
476.525
477.275 CH35
6
476.550
477.300 CH36
7
476.575
477.325 CH37
8
476.600
477.350 CH38
41
476.4375
477.1875 CH71
42
476.4625
477.2125 CH72
43
476.4875
477.2375 CH73
44
476.5125
477.2625 CH74
45
467.5375
477.2875 CH75
46
476.5625
477.3125 CH76
47
476.5875
477.3375 CH77
48
476.6125
477.3625 CH78
