22
Operations
Busy Channel Lock
If the channel is already in use, you can prevent the UHF CB radio from
transmitting on the busy channel. This is particularly important when
using CTCSS/DCS.
Key Beep
The Beep tone emits a tone when you press any of the buttons on the
microphone (except PTT button).
Roger Beep
This function emits a beep on the communication party to inform that
the transmission is finished.
Memory On/Off
The factory has pre-programmed all the UHF CB channels into the
open SCAN channel memory.
However, you can change or customize the channels by this menu.
To remove the channel from memory, press up or down in this menu.
The memory icon “M” disappears.
Squelch Tail
Squelch tail is the noise heard after the transmitting party releases the
PTT. It is heard by the receiving party.
If Squelch Tail is turned ON, on both radios this squelch noise will be
muted.
Flip LCD
You can flip the display for a convenient mounting position.
