Oricom UHF050, Руководство пользователя

Страница: 16 / 24

Operation
16
To switch to the primary Channel
1. Press the INS button on the Microphone.
BEEP Tone (BPT)
The Beep Tone emits a tone when you press any of the buttons on the
Microphone (except the PTT switch)
To Turn ON the BEEP Tone
1. Press and hold the
BPT
button for 2 seconds,
BPT
appears on the LCD
display.
To Turn OFF the BEEP Tone
1. Press and hold the BPT button for 2 seconds, the
BPT
disappears from
the LCD display.
Memory Scan
Initially All 40 channels are stored in memory, indicated by MEM next to the
channel on the LCD display. During a memory scan all channels in memory
are scanned for a signal.
To Remove or Add a channel to the memory
1. Select the channel you wish to add or remove from memory.
2. Press the
MEM
key to add or remove from memory,
MEM
will be
displayed on the LCD if the channel is in memory.
To start a Memory Scan
1. Press the M SC button, the scan will start,
M-SC
will be displayed on
the LCD display.
To stop a Memory Scan
1. Press the
M SC
button, the scan will stop,
M-SC
will disappear from
the LCD display.