8
Connect the telephone cable
When the batteries are fully charged, plug the end of the telephone cable into your telephone wall
socket.
In Australia some phone wall sockets are the old "non modular" style. If you have this
type of wall socket you will need to purchase a modular convertor plug (not supplied).
These can be obtained from most electronic stores.
Attach the belt clip
There is a belt clip included in the box that you can attach to the back of your handset if required.
Simply turn the handset over and slot the belt clip securely into the two recesses located on either
side of the handset.
:PVS1SPJTOPXSFBEZGPSVTF
Private exchanges: if your phone is going to use a private exchange (for example, if you have
to dial ‘0’ to get an outside line, please follow the steps on page 52 ).
Phone location
Make sure your phone:
t JTPOBESZþBUBOETUBCMFTVSGBDF
t JTOUBUSJQIB[BSEXJUIJUTQPXFSDBCMF
t JTOUPCTUSVDUFECZGVSOJUVSF
t JTBUMFBTUPOFNFUSFGSPNPUIFSFMFDUSJDBMBQQMJBODFT
t JTOUFYQPTFEUPTNPLFEVTUWJCSBUJPODIFNJDBMTNPJTUVSFIFBUBOEEJSFDUTVOMJHIU
Getting started
Pro610 810 User Guide-.indd 8
2012-7-16 14:08:01
