15
Roger Beep
Roger beep means a tone added to the end of broadcast, it
indicates that the user/operator has concluded speaking.
This is a tone which is automatically transmitted whenever the PTT
button is released.
This alerts the receiving party that you have ended the
transmission, and you are now in receive mode.
Press Menu button 6 times, screen will display ON RO, press up
or down button to choose RO OF or ON, press the PTT button to
confirm changes.
Key Tone
You can turn on and off an audible sound when keys are pressed.
Press Menu button 7 times, screen will display a bell and ON, press
Up /Scan button to choose ON or Down/Mon button to choose OF.
Default setting is ON, press the PTT button to confirm changes.
DCM
Dual channel monitoring allows you to monitor two channels, eg:
channels 12 and 17 can be monitored or 49 and 59.
Press Menu button 9 times, screen will display DCM OF, press
Down or UP to choose DCM OF or ON, when DCM is turned on, the
channel will need to be set by using the UP / Down buttons. Press
the PTT button to confirm selection.
Important:
In order for other people to receive your transmission, they must
also be on the same channel that you are currently using. Refer to
the "Changing Channels" section for more information.
When the PTT and/or CALL buttons are continuously pressed, your
Radio cannot receive any transmissions.
Reset the unit
Remove the batteries from the battery compartment, press and
hold the Menu/PWR button, now install the batteries making sure
they are in the right polarity. Your radio will turn on and display CH
12, release the Menu/PWR button.
Operation
