Oricom P700 Series, Руководство пользователя

Страница: 26 / 35

26
1. Press during standby. The 7-segment LCD displays the current
setting such as
r2
for 2 rings.
To change the ring delay setting,
1. Press for 2 seconds. The 7-segment LCD displays the current
setting such as
r2
for 2 rings.
2. Use or to adjust the number of rings.
3. Press again to confirm. The 7-segment LCD displays the new
setting.
Security PIN
A three-digit PIN is required for remote access. The factory preset code is
“000”. You can change it to a unique code of your own. This PIN code can
be up to 3 digits long.
To review the Security PIN,
1. Press during standby. The 7-segment LCD displays the current
PIN digit by digit.
To change the Security PIN,
1. Press for 2 seconds during standby.
2. Use or
to change the first digit.
3. Press to confirm the first digit.
4. Use or
to change the second digit.
5. Press to confirm the second digit
6. Use or
to change the third digit.
7. Press to confirm the third digit. The 7-segment LCD displays the
new PIN digit by digit.
Remote access
You can access your answering machine when you are away from home
by using a touch tone phone.
NOTE: The security PIN is different from the 4-digit PIN which is used for
registering/de-registering your handset(s).
NOTE: You need to enter the security PIN to access the answering
machine remotely.
RING
RING
VOL-
VOL+
RING
PIN
PIN
VOL-
VOL+
PIN
VOL-
VOL+
PIN
VOL-
VOL+
PIN