Oricom MX500, Инструкция по эксплуатации

Страница: 4 / 12

WARNING: The AC adaptor is not waterproof.
SETUP
Setup
Carefully unpack your MX500 Radio. We recommend that you
identify items listed in the following table before discarding the
packing materials. If any item is missing or has been damaged,
please contact your place of purchase.
AC Adaptor 1
Instruction Manual 1
Power Button
If battery charging is full, LCD appears “FL”, you should remove
the adaptor.
NOTE: If you have not inserted the battery pack, the LCD will
show "Er".
4. When charging is complete, remove the plug from the radio
and replace the cover ensuring it is fitted correctly
.
Accessories/spare parts can be purchased directly from Oricom.
Visit oricom.com.au or call 1300 889 785.
Connect the supplied flexible antenna to the
antenna connector, rotate it clockwise until it is tight.
WARNING: The battery pack and antenna must be installed
correctly to prevent water ingress.
IMPORTANT: Prior to using the transceiver for the first time, the
battery pack must be fully charged for optimum life and operation.
To avoid damage to the transceiver, turn the power OFF while
charging.
Rotate the connector cap on the top of the transceiver to expose
the charging socket.
Plug the AC Adaptor plug into the socket on the top of the
transceiver.
Place the battery into the transceiver so it fits flat, and then securely
attach the battery cover, as shown. Push the cover until the latch
returns to the locked position.
Transceiver 1