background image

2

Installation and Charger

1.  Connect the mains adaptor (supplied) 

to the socket on the back of the base 

unit and to the wall mains supply.

2.  Connect  the  telephone  cord  to  the 

phone socket on the back of the base 

unit and into the wall phone socket.

3.  Insert  2  rechargeable  Ni-MH  AAA 

batteries  (included),  observing  the 

correct  polarity,  into  the  battery  compartment  on  the 

handset. Slide the battery door firmly into place.

4.  Place the handset on the charging cradle and charge 

the batteries for a full 14 hours before using it for the 

first time.

Note:

It may take some time for the cordless handset to power 
up,  and  it  may  get  warm  during  initial  charge. This  is 

normal.

Tip!

It  is  good  practice  to  put  the  cordless  handset  on  the 

charging cradle when it is not in use to ensure that the 

handset is always fully charged.

GETTING STARTED

DO  NOT  USE  STANDARD/ALKALINE  BATTERIES  IN 
THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION 
AND/OR INJURY. USE ONLY NI-MH RECHARGEABLE 
BATTERIES  AS  SPECIFIED  IN THIS  USER  GUIDE. 
CONTACT ORICOM FOR REPLACEMENT BATTERIES.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY 
AN INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended 

type supplied with this product.

•  Never use alkaline or lithium batteries.
•  Do not dispose of the batteries in a fire, as they can 

explode.

•  Do  not  open  or  mutilate  the  batter y.  Released 

electrolyte is corrosive and can cause damage to the 
eyes or skin. It can be toxic if swallowed.

•  Avoid  contact  with  metal  objects  when  handling  the 

battery. These objects could short out the batteries or 

cause the conductor to overheat resulting in burns.

•  Do not attempt to recharge the battery cell by heating 

it.  Sudden  release  of  battery  electrolyte  can  cause 
burns or irritation to the eyes or skin.

•  Observe the proper polarity, or direction, of any battery. 

Reverse  insertion  of  the  battery  cell  can  result  in 

leakage or explosion.

•  Remove  the  batteries  if  you  do  not  plan  to  use  the 

product for several months at a time.

•  Follow the local regulations regarding the disposal of 

your packing materials, exhausted batteries and used 
phone. Wherever possible, recycle those materials.

WARNING

!

eco70-700.indd   2

2009-5-8   13:44:51

Содержание eco70





































Отзывы: