manualshive.com logo in svg

Oricom DTX4200, Руководство по эксплуатации

Поделиться
Скачать
Oricom DTX4200 Скачать руководство пользователя страница 14

14

Operations

Scanning

The Scan feature allows you to search for active channels automatically.
There are 3 scanning modes:
Open Scan, Group Memory Scan and Group tone Scan (a special case 

of Group Memory Scan).

Open scan

Press SCAN/RM to start scan. The OS-SC sub menu display will appear 

on the LCD display.
When a signal is found, scanning will stop at that channel to allow the 

signal to be heard, then resume scanning when the channel is clear 

again.
The scan resume time can be set to 5, 10 or 15 

seconds of P5 (default).
ch        1-2-3-4-5-6-7 ….. 77-78-79-80
Note: During open scan rotating the channel 

selector will not change the scan direction.
To stop the scan, press the SCAN/RM button or press the PTT.

Remove Memory in Scanning

To remove a channel from the scan, 

press and hold SC/RM button for 2 

seconds.
The channel will be removed from 

the current scan. When the scan stops, the removed channel will be 

reinstated.

MR

SCAN

RM

SWP

SRX

MW

MENU

GTS

2 sec

MR

SCAN

RM

SWP

SRX

MW

MENU

GTS

Содержание DTX4200



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды