Oricom DTX4000, Руководство по эксплуатации

Страница: 14 / 35

14
Operations
Scanning
The Scan feature allows you to search for active channels automatically.
There are 3 scanning modes;
Open Scan, Group Memory Scan and Group tone Scan (a special case
of Group Memory Scan).
Open scan
Press SCAN/RM and scanning starts. The OS-SC sub menu display
appears on the LCD.
When a signal is found, scanning will stop at that channel to allow the
signal to be heard, then resume scanning when the channel is clear
again.
The scan resume time can be set as an optional
pause of P8 (default).
ch 1-2-3-4-5-6-7 ….. 77-78-79-80
Open Scan, the scan direction cannot be changed by
rotation of the channel control or microphone buttons.
To stop the scan press the SCAN/RM button or press the PTT
Remove Memory in Scanning
While the radio stops scanning on a busy
channel, press hold SC/RM button for 2
seconds.
Channel will be remove from current
scanning. The removed channel will be reinstated after the scan is
stopped and restarted.
Scan 1-
2 -3-4-5-6-7 ….. 77-78-79-80
RM Scan 1-3-4-5-6-7 ….. 77-78-79-80
Note: Up to 10 channels can be removed for the current scan.
SCAN
RM
SCAN
RM
2 sec