48
Appendix: Registration of CARE620HS Additional Handset
While recording an
outgoing message or
listening to messages,
the unit rings and
recording stops.
Probably a call is being
received.
Answer the incoming
call and try again to
record your outgoing
message later.
Please contact the technical support of the telephone service provider
for further information.
Appendix: Registration of CARE620HS
Additional Handset
Package contents
The package contains the following:
Oricom CARE620HS Pack Contents
- 1 x Additional Handset
- 1 x Charging Base Station
- 1 x AC adaptor
- 2 x Rechargeable Batteries
Connecting your phone:
- Connect AC adptor to the base station and the mains power.
- Insert batteries in handset, place handset on base station for charging.
Before using your phone for the first time, charge batteries continuously
for 16 hours.
Only use plug adaptor supplied with the unit and rechargeable batteries
with your phone.
Registration:
1. Make sure the handset is out of the base station and shows
REGISTER
before you begin registration.
2. Press and hold
on the back side of telephone base of CARE620
or CARE820 in standby mode for around 5 seconds until the base
LED is flashing.
