21
Continuation of table 3
№
parameter
Name of
parameter
М
Value of
Х
Value of X
by default
Proh
29
Names
(codes) of
currency
payments
1 – name
2 – course
To 3
symbols
for name
499,9999999
Є
0
37
Hour zones
1 to 10 –
number of
hour zone
Interval of
time–hh:mm
6*
REMARKS:
1. The parameter is programmed (reprogrammed) not dependent to the
condition of
P2.
If the value of at least of one the taxation coefficient has been changed by
pressing key
“TL”
the new set of taxation coefficients is recorded in the fiscal
memory.
2. When programming values for % the decimal point is not entered. The
digits after it are compulsory entered.
3. In regime
SERVICE
you could enter only by a password by default
/6/,this means that the 6
th
part of
P23
could not reprogrammed.
4. For entering text information it is necessary to enter a double digit code
for presenting every symbol. The codes for simbols are shown in
APENDIX 1.
As the indication is too small to hold 24 double digit codes on it are
indicated the codes for the last entered five symbols.
If the spacing is a first symbol in a line then it is entered by pressing key
“0” twice.
Correction of a mistake made when entering the code of a symbol is
possible by reprogramming the line in which it has been made.
5. The advertisement text lines 7 and 8 are printed at the end of a receipt
only if they have been programmed.
6. When programming hour zones (periods) you should have in mind that:
- for every hour period four digit couples are entered
XXYYZZVV.
- for the beginning of the period the smallest value is 00:00.
- for end of period the biggest value is 23:59;
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com