(2) Shelves
Top and Bottom
(20)
Euroscrews
Shelf Screws
(8)
Connector Bolts
(8)
Hanging
Brackets
(4)
freedomRail Garage Assembly Instructions
GOCabinet
Contents of Package
Assembling the GOCabinet
Step 1: Attach Hanging Brackets
Right Side
Left Side
Back Edge
Back Edge
Attach Hanging Brackets to Sides using Euroscrews. (
If using power drill, set torque to low setting.)
Step 2: Install Connector Bolts
Top and
Bottom
Smaller Holes for
Connector Bolts
Install (4) Connector Bolts into small holes on Top and Bottom.
Step 3: Attach Sides
(a) Attach Sides to Bottom.
(b) Tighten Cams by turning clockwise until snug.
Cam
Lock
Open
Step 4: Attach Top
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Apply Cover Caps to expose Cams.
Top
Over
1
Backing Nails
(16)
Left Side
Right Side
Cabinet Back
Tools Required
Power Drill
#2 Phillips Driver
Hammer
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
#2 Phillips
Screwdriver
Align Arrow With Hole.
