freedomRail Assembly Instructions
2 Drawer Double Hang OBox
Contents of Package
Assembling the 2 Drawer Double Hang OBox
Euroscrews
(26)
(2)
(12)
(4)
1 5/8" Wood Screws
Connector Bolts
Hanging
Brackets
(4) Full Extension Drawer Glides
(2) Drawer Pulls
Machine Screws
(For Drawer Pulls)
(4)
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Step 1: Attach Hanging Brackets
Left Side
Right Side
Back Edge
Back Edge
Attach Hanging Brackets to Sides using Euroscrews.
(If using power drill, set torque to low setting.)
Step 2: Install Connector Bolts
Bottom
Smaller Holes for
Connector Bolts
Step 3: Attach Sides
Cam
Lock
Open
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Step 4: Attach Top
Top
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
1
Over
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
Left Side
Right Side
Top
Left Side
Bottom
(2) Drawer Backs
(2) Drawer Fronts
(2) Drawer Bottoms
(2)
Drawer
Left
Sides
(2)
Drawer
Right
Sides
Align Arrow With Hole.
