EN
GETTING STARTED
1. Connect the AC adaptor socket to the Base
Unit and to your room’s power socket.
2. Rest the handset on the Base Unit to charge.
Once plugged in, allow the handset to charge
for 15 hours before using.
Connect the phone line to the Base Unit and to
your room’s telephone socket.
CONNECTING THE AC ADAPTOR
CONNECTING TO PHONE LINE
Batteries come with your phone. One is already
installed in one handset, while the other needs to
be installed in the second handset.
Fitting the batteries in the handset
1. Insert the battery into the handset by inserting
the piece at the end of the wire into the top
left of the battery indention on the handset.
2. Fit the battery compartment cover by sliding it
down so that it clicks firmly into place.
INSTALLING THE HANDSET
BATTERIES
INSTALLING THE BASE UNIT
BATTERIES
6
Four batteries (AAA size) come with your Base
Unit.
Insert the four batteries as indicated, matching
correct polarity (+, -)
NOTE:
Reversing the orientation may damage the
Base Unit.
Before using the handset, charge the handset for
at least 15 hours.
Whenever you see the battery icon on the hand-
set display become nearly empty, or hear the
warning tone during the call, please:
•
End the call as soon as possible.
•
Don’t use the speakerphone mode for conser-
vation since this will further reduce the take
time.
•
Put the handset back on the charger for
charging until the battery icon returns to high
level.
To charge the handset, place the handset in the
charger. The base charge light will come on to
indicate the charging of handset. Always put the
handset in the base cradle with the keypad facing
outwards.
NOTE:
Please note the following:
•
Standby time: 5 days
•
Talk time: 7 hours
•
Handset charging time: 15 hours
•
Normal conditions of use: 0°C to 45°C
•
AC adaptor for base unit: 120VAC 9V 60Hz
400mA
CHARGING THE HANDSET
BATTERIES
