Oregon Scientific WS909, Руководство пользователя, Страница: 6 / 7

MAINTENANCE
ABOUT OREGON SCIENTIFIC
Visit our website ( )
If you’re in the US and would like to contact our
Customer Care department directly, please visit:
us.oregonscientic.com
OR
Call 1-800-853-8883.
For international inquiries, please visit:
SPECIFICATIONS
TYPE
Weight
MAIN UNIT
L x W x H
DESCRIPTION
80mm(L)x80mm(W)x 228mm(H)
(3.15in x 3.17in x 8.98in)
700g ( 1.54lbs)
Power adaptor: INPUT 100 –
240V ~ 50/60Hz
Power
4
VOLUME SETTINGS
CLEANING THE WATER TANK
The water tank should be cleaned regularly by
using the cleaning clip.
Press the VOLUME button repeatedly to
adjust the speaker volume.
The order of setting choices is low, medium
and high.
The suitable water temperature for the water
tank is 15 - 40 °C.
Clean water tank and cover weekly.
Refresh the water in the water tank each time
you use the unit.
Make sure the unit has been cleaned, drained
and dried completely, including the body, the
water tank, the cables and plugs, with a soft
and dry cloth when you are not going to use
the unit for a long time.
Do not immerse the whole unit or any cables
and plugs in water or any other liquid. Clean
the base unit and the body with a dry cloth.
Do not use cleaning or scouring agents.
Remove the Glass Cover and Plastic Cover
from the unit. Pour away any remnant from
the water tank as described in GETTING
STARTED .
Pick a small piece of soft lint-free cloth by the
cleaning clip.
Reach and clean the diffuser plate at the base
of the water tank with the cleaning clip and the
cloth. Clean also the interior of the water tank.
Put the covers back to the unit.
•
•
•
•
•
•
•
•
1.
2.
3.
4.
EN
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE
reserves the right to interpret and construe any
contents, terms and provisions in this user manual
and to amend it, at its sole discretion, at any time
without prior notice. To the extent that there is any
inconsistency between the English version and
any other language versions, the English version
shall prevail.
WARNING
Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio TV
technician for help.