Oregon Scientific WRS368 Скачать руководство пользователя страница 9

Страница: 9 / 17

NOTE

TIP

NOTE

In a non-controlled environment, many factors

can affect battery life, such as volume, LCD backlight
and temperature. When the batteries are not used for a
long period of time, remove them to save battery power.

When the batteries are becoming low on power

, appears on the right side of the LCD and the LCD

backlight dims.

Do not use different types of batteries together

or mix new batteries with old ones. When any of the
batteries are depleted, replace all batteries with new
ones.

INSTALLING THE WALL MOUNT UNIT (OPTIONAL)

The Wireless Remote Speaker is equipped with rubber
supports to give your unit a stable base while placed on
any a flat surface.

However, you have the option to fix the location of your
speaker against the wall using the supplied L-shaped
wall-mount unit and 4 screws:

1. Position the wall-mount unit's vertical panel onto the

area of the wall where you would like to hang the
unit.

2. Secure the 15mm (0.6 in) screws into the

corresponding holes of the vertical panel until it is
firmly fixed against the wall.

3. Place the Wireless Remote Speaker onto the

horizontal panel of the wall-mount unit, making sure
to align the 2 screw holes of the horizontal panel
with those of the speaker.

4. Insert the remaining two 10mm (0.4 in) screws

into the aligned holes and secure the speaker onto
the horizontal panel. The wall-mount unit and
speaker should be securely fixed in place.

BASIC SPEAKER OPERATION

Once  the  audio  sources  are  properly  connected  to  the
Transmitter,  and  the  AC  adaptors  connected  to  the
Transmitter  and  Wireless  Remote  Speaker  (or  batteries
inserted into the speaker), you are ready to operate the unit.

POWER ON / OFF

1. To turn on the Wireless Remote Speaker, press the

button located on the unit's Control Panel.

The volume bar, speaker
icon, clock, reception
status icon

and

audio source number all
appear on the LCD. The
LCD backlight also turns
on.

If the Wireless Remote Speaker is receiving a signal
from the Transmitter,

is displayed on the LCD. If the

icon does not appear, power off the unit and then turn it
back on to reset the signal. Make sure

appears full.

If appears on the LCD, the reception signal

is interrupted or the speaker is out of range of the
Transmitter. The audio source number will not show on
the display and the LCD backlight turns off. See section
on "TROUBLESHOOTING" for more information.

2. To power off your Wireless Remote Speaker, press

the

button again (the clock remains on even

when the speaker is turned off).

The Wireless Remote Speaker should be turned

off even if the power at the audio source has been turned
off.

When left unused for a long period of time, the

unit should be unplugged from the electrical socket. If
you are using batteries to operate the Wireless Remote
Speaker, remove them to save battery power.

ADJUSTING VOLUME

1. To increase volume, press the

button once. To

continuously increase volume, press and hold the

button down until the desired volume level is

reached.

Do not turn up the volume while listening to a

portion of audio with very low-level inputs or no signals.
If you do, the speaker may become damaged when a
peak level portion is played.

2. To decrease volume, press the

button once.

To continuously decrease volume, press and hold
the

button down until the desired volume level