9
EN
2. Press
MAX / MIN
to toggle between current / MAX
wind speed and current / MIN wind chill displays.
The timestamp is displayed accordingly in the Clock
Area.
To clear minimum wind chill reading / maximum wind
speed reading:
1. Press
SELECT
to navigate to the Wind Speed / Wind
Direction / Wind Chill Area. will show next to the
Area.
2. Press
MAX / MIN
repeatedly until minimum wind
chill reading or maximum wind speed reading is
displayed.
3. Press and hold
MAX / MIN
to clear the readings.
NOTE
The wind chill factor is based on the combined
effects of temperature and wind speed. Displayed wind
chill is calculated solely from Channel 1 sensors.
UVI / BAROMETER / RAINFALL
The weather station works with one UV sensor and
one rain gauge. The station is capable of storing and
displaying the hourly history data for the last 10 hours
of UV index, and 24
hours of rainfall and barometric
pressure readings.
UVI
BAROMETER
RAINFALL
The bar chart display shows the current and historical
data for the UV index, barometric pressure and rainfall
readings.
NOTE
The number shown in the horizontal axis (Hr)
indicates how long ago each measurement was taken
(e.g. 3 hours ago, 6 hours ago, etc.). The bar represents
the measurement taken for that specific 1 hour period.
E.g., if it is 10:30 pm now, the bar plotted directly above
-1 shows the reading recorded from 9 to 10 pm and
-6 shows the reading recorded earlier in the evening,
between 4pm-5pm.
To view the UV / Barometer / Rainfall readings:
1. Press
SELECT
to navigate to the UV / Barometer /
Rainfall Area. will show next to the Area.
2. Press
MODE
to toggle between UVI / Barometer /
Rainfall readings. The corresponding icon will appear:
BAROMETER
UVI
RAINFALL
To select the measurement unit for the barometer or
rainfall readings:
In the UV / Barometer / Rainfall Area, press
UNIT
to
switch between:
• Barometer: Millimeters of mercury (
mmHg
), inches
of mercury (
inHg
), millibars per hectopascal (
mb
).
• Rainfall: Millimeters (
mm
), inches (
in
), recorded for
that hour.
NOTE
As the purpose of the bar graph is only to provide
a quick comparison between the records of the past 24
hours, the vertical axis cannot convert from inches to mm.
Therefore, changing the measurement unit will have no
effect on the bar graph display.
UV INDEX
The UV index levels are as follows:
UV INDEX
DANGER LEVEL
ICON
0-2
Low
3-5
Moderate
8-10
Very high
11 and above
Extremely high
To view the maximum UV reading:
1. Press
SELECT
to navigate to the UVI / Barometer /
Rainfall Area. will show next to the Area.
2. Press
MODE
repeatedly to select UV display.
3. Press
MAX / MIN
to toggle between current / MAX
UV index display.
The timestamp is displayed accordingly in the Clock
Area.
To clear maximum UV reading:
1. Press
SELECT
to navigate to the UVI / Barometer /
Rainfall Area. will show next to the Area.
2. Press
MODE
repeatedly to select UV display.
3. Press and hold
MAX / MIN
to clear the readings.
BAROMETER
To set the altitude level compensation for the
Barometer readings:
1. Press
SELECT
to navigate to the UVI / Barometer /
Rainfall Area. will show next to the Area.
2. Press
MODE
repeatedly to select Barometric
display.
3. Press and hold
MODE
to enter the altitude setting.
4. Press
/
to increase / decrease the setting value.
5. Press
MODE
to confirm the setting.
RAINFALL
To view the recorded rainfall of the current hour or
last 24 hours:
1. Press
SELECT
to navigate to the UVI / Barometer /
Rainfall Area. will show next to the Area.
2. Press
MODE
repeatedly to select Rainfall display.
3. Press
MAX / MIN
repeatedly to toggle between
current, past 24 hour rainfall or accumulated rainfall
readings.
WMR86NSX_IM_EN R10.indd 9
2018/9/20 上午11:53
