EN
4
GETTING STARTED
This product can be used with up to 2 remote units
to transmit outdoor temperature and humidity data
to a main (indoor) unit. The measurement unit (
°
C
or
°
F) and channel number (1, 2, or 3) switches are
located in the battery compartment, and should be
set prior to installation.
Additional remote units sold separately.
SET UP
1.
Place remote unit as close as possible to the
main unit.
2.
Remove the battery compartment lid. (You will
need a small Phillips screwdriver.)
3.
Assign a Channel Number. If
you are using more than one
remote unit, select a different
channel number for each unit.
4.
Set the measurement unit.
5.
Insert the batteries. Match
the polarity, as shown in the battery
NOTE
1 2 3
CHANNEL
RESET
1 2 3
CHANNEL
RESET
