Oregon Scientific RRM-112, Руководство пользователя

Страница: 6 / 10

6
GB
HOW TO USE THE ALARMS
To activate or deactivate an alarm, press [ ON/OFF]. Press
[ALARM] to display the alarm time. Blank will be displayed if the
alarm is deactived.
You can have both alarms enabled or disabled at the same time.
When an alarm goes off, press [
ON/OFF] or [ALARM] to mute
the alarm. Or press [SNOOZE/LIGHT] to activate the snooze
function.
SNOOZE FUNCTION
When the snooze function is activated, the alarm will be muted
temporarily and set off again after eight minutes. To disable the
snooze function, press [
ON/OFF] or [ALARM].
Note: Snooze function is applied only to wake up alarm. It will not
have any effect to wake up radio.
SECTION 3 THE RADIO
HOW TO USE THE RADIO
To turn on the radio, press [RADIO]. The last selected radio fre-
quency will be shown.
To change the frequency,
1. Press [AM/FM] to select AM or FM.
2. Use TUNING [ ] / [ ] to locate the desired frequency.
Press once to advance 1 step, press and hold to auto search the
next channel.
To change the volume, use VOLUME [
+
] / [
-
] .
To select a programmed channel, press [STATION]
To turn off the radio, press [RADIO].
AUTO SEARCH FUNCTION
The RRM112 is equipped with the Auto Search function; the unit
will automatically search for the next clear channel.
To use the auto search function,
1. Press and hold TUNING [ ] / [ ] to activate the auto search
function,
2. The frequency is kept increasing or decreasing until a clear
channel is found.
Note: User may release the key during the tuning process
HOW TO PROGRAM A CHANNEL
The unit allows you to program up to 8 FM and 8 AM radio stations.
To do so,
1. Turn on the radio.