E
N
3
1
. MODE:
Toggle between clock displays; enter setting
mode
2
.
:
Increase values in setting mode; activate clock
signal reception
3
. RESET:
Reset unit to default settings
4
.
USB port (at the side)
5
.
Battery compartment (at the bottom)
6
. MEM:
Toggle between maximum and minimum
temperature / humidity displays
7
.
:
Decrease values in setting mode; deactivate
clock signal reception
8
. °C / °F:
Select temperature unit
9
. EU / UK:
Select the nearest radio signal (RMS300
only)
REMOTE SENSOR (FIG 3)
1
2
3
4
5
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4.
RESET
hole
5.
CHANNEL
switch
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG
2).
3. Press
RESET
after each battery change.
LOCATION
MEANING
Clock / alarm area
Main unit batteries low
Outdoor temperature area
Remote sensor batteries low
REMOTE SENSOR
The remote sensor can collect data from up to 3 channels.
To set up the remote sensor:
1. Open the battery compartment and insert batteries,
matching the polarity.
2. Select a channel then press
RESET
.
3. Close the battery door.
4. Place the remote sensor within 30 m (98 ft) from the
main unit.
RMS300 IM EN R3.indd 3
1/4/08 11:52:32 AM