E
N
4
GETTING STARTED
POWER
Insert batteries before first use, matching the polarity
(+ and -).
NOTE
Install batteries in the remote sensor before the
main unit. Press
RESET
after each battery change. Do
not use rechargeable batteries. We recommend that
you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
freezing.
shows when batteries are low.
UNIT
LOCATION
Main
Indoor temperature area
Remote
Outdoor temperature area
REMOTE SENSOR
The sensor collects temperature readings approx.
every 40 seconds and sends them to the main unit. The
main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Slide open the battery door.
2. Insert the batteries, matching the polarity (+ / -).
Reset after each battery change.
3. Select a channel. Make sure you use a different
channel for each sensor.
4. Close the battery compartment.
5. Secure the sensor in the desired location using
the wall mount or table stand.
RMR382_EU_M_EN_R2.indd 4
5/12/06 7:10:50 PM
