12
EN If you wish to disable the auto-reception feature, press the
[
▼
]
button for three seconds. The radio reception signal will disappear.
The unit will not respond to radio signals.
To enable the feature again, press the [
▲
]
button for
3
seconds.
The radio reception signal will start blinking to initiate reception
automatically.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold
[SET/MODE]
for
3
seconds. The
display will return to MODE 1, with the hour digits blinking.
Use [
▲
]
or
[
▼
]
to select the hour. Keep pressing the button will
increase or decrease the value rapidly.
Press
[SET/MODE]
to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, then the day-of-
month, month, display language, day-of-week and offset for the
second time zone.
Note that the time and date are displayed in 24-HOUR clock and
DAY-MONTH format, respectively. For display language, you can
choose among English (E), German (D), French (F) and Italian (I)
-in that order. Day-of-week is the usual sequence of Monday
through Sunday.
For the second time zone, which is indicated by the ZONE ICON,
enter the hour offset using the[
▲
]
or
[
▼
]
buttons and the
RMR132HG will calculate the second time accordingly.
If there is an item you do not wish to change, simply press
[SET/MODE]
to bypass the item.
When you are done, press
[SET/MODE]
to exit. The display will
return to the mode last chosen.
HOW TO SET AND ARM THE ALARMS
The RMR132HG has
2
alarms, ALARM 1 and ALARM 2. They
can be invoked together or independently.
To set an alarm,
1. Press
[24 hr
OFF / ((•))]
once to select ALARM 1 or again
to select ALARM 2. The last selected time of the alarm will be
displayed. If you have never set the alarm before, the time will
be displayed as 0:00.
2. Press
[24 hr
OFF / ((•))]
for
3
seconds. The hour digits will
blink.
3. Enter the hour using [
▲
]
or
[
▼
]
.
4. Press
[24 hr
OFF / ((•))]
. The minute digits will blink.
5. Enter the minutes using [
▲
]
or
[
▼
]
.
6. Press
[24 hr
OFF / ((•))]
to exit.
The alarm ON icon for the alarm chosen will be displayed indicating
the alarm set above is now armed.
You can also arm or disarm an alarm by pressing the
[AL ON/OFF]
button.
RMR132HG_M_EN_R01
8/13/04, 12:30 PM
12