5
GB
3) Current Time with Weekday 4) 2 zone-time with Weekday
2
nd
zone-time
2
nd
zone-time Calendar
To display the alarm clock and details, press [ALARM]. The alarm
time will appear in the lower line of the display. Press [TEMP] to
display the indoor temperature.
ABOUT RADIO RECEPTION
When the unit is within range of its respective radio signal, the radio
control mechanism will override all manual settings unless radio
reception has been deactivated.
After battery installation (with the antenna plugged in), the unit will
start to search for a radio signal automatically. When it is receiving
radio signal, the radio-reception icon will start to blink. A complete
reception generally takes about 2 to 10 minutes, depending on the
strength of the radio signal.
The antenna icon indicates the quality of reception.
Strong
Weak
No Reception
Receiving
When the reception is complete, the radio-reception icon will appear
as [
] and the received radio-controlled time will be displayed
accordingly.
Interference
Reception can be affected by a number of factors. For best reception,
place the device away from metal objects and electrical appliances.
Note: Interference from sources such as TV sets can affect the signal.
If, after batteries have been inserted for ten minutes, the signal is
not received, then set the time manually (see section: How To Set
The Clock & Calendar Manually).
HOW TO ENABLE OR DISABLE
AUTO-RECEPTION
If you wish to disable the auto reception of a radio signal when the
unit is within range of a transmitter
, simply unplug the antenna or
press and hold [
▼
] for 2 seconds. The radio-reception icon will
disappear and the unit will NOT respond to radio signals.
To enable the feature again, plug in the antenna again or press and
hold [
▲
] for 2 seconds to force signal reception. The radio-reception
icon will be shown again and it will start blinking to initiate reception
automatically.
HOW TO SET THE CLOCK &
CALENDAR MANUALLY
1.Press and hold [MODE] for 2 seconds.
2.Enter the 2
nd
time-zone offset hour using [
▲
] / [
▼
]. You can
select b 23 and - 23 hours. Hold down either button to
rapidly increase or decrease the value. Press [MODE] .
nd
