10
EN
unless the AC / DC adaptor is used.
• Adjust the
FOCUS
knob to make the image clearer.
• Adjust the
IMAGE ROTATION
knob to rotate the image
clockwise or anti-clockwise.
• Manually tilt the projection unit to position the image or
press the
180
°
ROTATION
button to reverse the image
and turn it upside down.
NOTE
You can also press the
SNOOZE / LIGHT
button to
project the time and alarm status for 8 seconds.
WA K E - U P V I B R AT I N G A L A R M – V R 1 0 1
(OPTIONAL)
The vibrating alarm receives a signal from the clock and
performs a wake-up function by vibrating. It is designed to
go under your pillow.
The device has a range of roughly 15 metres and has an
LED meter to show data transmission and battery level.
The switch within the vibrating alarm can adjust to alarm 1
or alarm 2, or both. Simply select the alarm time on the
clock unit when you want the vibrating alarm to wake you
up.
NOTE
The vibrating alarm is powered by 2 x UM-3 / AA
1.5V batteries (included). It is also compatible with
rechargeable batteries (not included).
The talking clock language can be changed in the Clock
Setting Mode, see the “Set Clock / Calendar” section for
further information.
TALKING CLOCK VOLUME
To change the talking clock volume, press
or when the
voice-activated function is on.
ERASE THE TALKING CLOCK TRAINED VOICE
COMMANDS
1. Turn the AC adaptor power OFF and then ON again, or
press
RESET
.
2. Press and hold
Sound / on / off
and the screen below
will appear.
3. Press
TALK
to erase the trained voice commands. The
“IIII” icon will stop moving when the memory has been
erased.
OCK
/ CALENDAR
PROJECTION UNIT
The projection unit can display both time and alarm status.
To use this feature:
• Slide the
PROJECTION
switch to
ON
to activate
continuous projection. However, this function will not work
RM998Pmanual-E
04/12/7, 2:51 PM
10
