EN
6
Water will pool to the center of the cross when the rain
gauge is level.
If water remains on -4, the gauge is not horizontal.
If necessary, adjust the level using the screw.
NOTE
For best results, ensure the base is horizontal to
allow maximum drainage of any collected rain.
E
THERMO SENSOR
. Insert the batteries, matching the polarity (+ and -)
as shown in the battery compartment.
. Remove screws and slide the cover off in an
upwards motion.
2. Insert the batteries (2 x UM-3 / AA), matching the
polarities (+ / -). Press
RESET
after each battery
change.
3. Remove the fibre tape.
To ensure a level plane:
Put a few drops of water on the cross at the base of the
funnel to check the horizontal level.
3
1
2
3
4
