7
GB
Power
Main unit
: 2 pcs UM-3 or “AA” 1.5V
battery
Remote sensing unit
: 2 pcs UM-3 or “AA” 1.5V
alkaline battery
Weight
Main unit
: 6.10 ounces (173 gm)
Remote sensing unit
: 9.17 ounces (260 gm)
Dimensions
Main unit
: 5.24 x 3.54 x 0.98 inches
(133 x 90 x 25mm)
Remote sensing unit
: Dia 5.51x5.71 inches
(140 x 145mm)
NOTE ON COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operations.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC :
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician