Oregon Scientific RAR213HG, Руководство пользователя, Страница: 5 / 13

EN
5
LoCATIoN MEANING
Clock area Main unit batteries low
Outdoor temperature area Sensor batteries low
REMoTE SENSoR
The main unit can collect data from up to 5 sensors.
To set up the sensor:
1. Open the battery compartment.
. Select a channel then press
RESET .
3. Close the battery door.
4. Place the sensor within 98 ft (30 m) of the main
unit using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 5 ft (1.5 m) and which can shield it from direct
sunlight or wet conditions for an accurate reading.
1.5 m (5 ft)
NOTE
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
SENSoR DATA TRANSMISSIoN
To search for a sensor:
• Press and hold and MoDE at the same time for
seconds.
To auto-scan among sensors:
The main unit can search for the sensor(s)
automatically. The temperatures will be displayed
automatically in sequential order.
The sensor reception icon in the remote sensor
area shows the status:
ICoN DESCRIPTIoN
Main unit is searching for sensor(s).
A channel has been found.
The sensor cannot be found.
TIP
The transmission range may vary depending on
many factors. You may need to place the sensor(s) in
different locations to get the best result(s).