7
EN
TO VIEW COMPASS
• Press
COMPASS
to navigate to the Compass
mode.
NOTE
The compass display is active for 30 seconds at
a time. After this, the display will go back to the previous
mode.
NOTE
Always take bearings in the open air, not inside
buildings, tents, caves, or other shelters.
NOTE
Compass readings should be performed
away from magnetic materials. Avoid large magnetic
objects, power lines, loudspeakers, electric motors
etc.
COMPASS SENSOR CALIBRATION
Before the compass is first used, we recommend that
you calibrate the compass sensor.
To calibrate the compass sensor:
1. Press
COMPASS
to navigate to the Compass
mode.
2. Press and hold
COMPASS
to enter settings mode.
3. Press
ALT / +
or
BARO / -
to navigate to Calibration
mode.
4. Press
TIME
to begin calibration of the compass.
5. Rotate the watch counter clockwise at the same speed
as the moving segments around the circumference
of the display. The rotation will be finished once you
have performed 1 1⁄4 turns and the display will appear
as shown below:
