4
EN
SET UP
1.
Place remote unit as close as possible to the
main unit.
2.
Remove the battery compartment lid.
(You will need a small Phillips screwdriver.)
3.
Assign a Channel Number.
If you are using more than
one remote unit, select a
different channel number
for each unit.
4.
Set the measurement unit.
5.
Insert the batteries. Match
the polarity, as shown in
the battery compartment.
6.
Press
RESET
with the point of a blunt object
(such as a ball point pen).
GETTING STARTED
This product can be used with up to 2 remote units to
transmit outdoor temperature and humidity data to a
main (indoor) unit. The measurement unit(
°
C or
°
F) and
channel number (1, 2, or 3) switches are located in the
battery compartment, and should be set prior to
installation.
Additional remote units sold separately.
NOTE
PS R01 English R15
7/23/03, 4:53 AM
4
