15
EN
Searching
No sensor
Sensor found
Temperature is given at the top; humidity is below.
VIEW MIN / MAX / CURRENT MEASUREMENTS
Press
SELECT
3 times until the Temperature and
Humidity Areas flash. Press
UP
or
DOWN
to scan
the readings.
CLEAR MIN / MAX RECORDS
While viewing Min/Max records, press and hold
UP
or
DOWN
for 2 seconds until a beep sounds. This clears
the previous measurements from the memory.
SELECT REMOTE UNIT CHANNEL
While in the Temperature / Humidity Mode, press
CHANNEL
to switch between CH 1, 2, or 3, or press
and hold
CHANNEL
for 2 seconds to enter Auto scan
mode. If only 1 remote unit is in use, you will not be able
to change channels or select Auto. If you select “Auto”,
the channel will change every 3 seconds. To deactivate,
press and hold
CHANNEL
for 2 seconds again.
SENSOR SEARCHING
If there is no remote unit signal, the temperature and
humidity measurements will be blank. Check the remote
unit batteries, or press and hold
UP
and
DOWN
for
2 seconds to search for the remote unit(s).
PS M02 English R18 op
7/24/03, 11:56 AM
15
Black
