4
EN
RM939PA
• WWVB-60 generated from the atomic clock in Fort
Collins, Colorado.
The radio signal range is 3219km (2000 miles).
For RM939P slide the
UK / EU
switch to the
appropriate setting for your location.
RESET
whenever
you change the selected setting.
RECEPTION SIGNAL
Once batteries have been installed
will flash to indicate
it is searching for a signal.
STRONG WEAK NO SIGNAL
To force a signal search and enable / disable the clock
radio signal reception, press / and hold for 2 seconds.
will then disappear from the display.
CLOCK
You only need to do this if you have disabled the clock
radio reception, or if you are too far from the radio
signal.
To manually set the clock:
1. Press and hold
CLOCK
for 2 seconds. The setting
will blink.
2. Use / to change the setting.
3. Press
CLOCK
to confirm.
4. Repeat steps 2 and 3 to set the time zone offset, 12 /
24 hour format, hour, minute, year, day-month format,
month, day and language.
5. Press
CLOCK ALARM
or
MOTION ALARM
to exit
settings mode.
For the RM939PA, the time zone options are (-8)
Pacific, (-7) Mountain, (-6) Central, and (-5) Eastern.
The language options are: English (E) French (F),
German (D), Italian (I), and Spanish (S).
To change the clock display:
Press
CLOCK
to toggle between: Clock with Seconds,
Clock with Day and Clock with Time Zone Offset.
ALARM
Two daily alarms can be activated. The alarm sound
can be a melody, beeping tone or vibration. (Vibration
wake-up device VR101 / VR101A must be purchased
separately).
RM939P_M_EN_R1
2006.3.16, 5:25 PM
4
