5
GB
3. Replace the battery compartment door.
4. Flip open the table stand and press the [RESET] button with a
blunt stylus. It ensures easier synchronization between the trans-
mission and reception of signals.
Replace the batteries when the indicator [
] of the indoor tem-
perature lights up.
GETTING STARTED
Once batteries are in place for the remote units, they will start trans-
mitting samplings roughly at 30-second intervals.
The main unit will also start receiving once batteries are installed.
The temperature of the selected channel will be displayed on the
top line and the indoor temperature on the bottom line. The main
unit will automatically update its readings at 30-second intervals.
The temperature variance for the last 12 hours is automatically
scanned on the trend chart.
If no signals are received, blanks will be displayed. Press
[CHANNEL] and [MEMORY] simultaneously to enforce another
search. This is useful in synchronizing the transmission and recep-
tion of the remote and main units.
Repeat this step whenever you find discrepancies between the read-
ing shown on the main unit and that on the respective remote unit.
HOW TO CHECK REMOTE AND
INDOOR TEMPERATURES
The indoor temperature is shown on the bottom line of the display.
Temperature readings, received from a remote sensor, are displayed
on the top line of the unit.
Press [CHANNEL] to change from one channel to the next.
