background image

 CLEANING

Do not immerse in any liquid.

Never use abrasive cleaners, brushes, 

gasoline, kerosene, glass / furniture polish or  

paint thinner to clean. 

Unplug the unit and allow it to cool down before 

cleaning. Clean only with a soft, slightly damp 

sponge. Never allows water or any other liquids to 

come into contact with the unit.

Do not attempt to repair the 

Massage Seat with 

Heat

. There are no user serviceable parts.

3

1.

2.

1.

2.

1.

2.

1.

2.

Press 

Full

Upper

 or 

Lower

 button to 

choose the massage area as needed. The 

corresponding LED light will illuminate. Press 

the same button to deselect and the LED 

indicator light will turn off.

Press the 

STRENGTH

 button to turn on the 

seat massage. The corresponding LED light 

indicator will be on.

Press the button multiple times to toggle 

through massage strength of low, medium, 

high and seat massage off option. The LED 

light indicator will be turned off when the seat 

massage is off.

  GETTING STARTED

 STORING

  MAINTENANCE

Place the unit in its box or in a safe, dry, cool place. 

Refrain from sharp edges or pointed objects that 

might cut or puncture the fabric surface. To avoid 

breakage, do not wrap the power cord around the 

unit. Do not hang the unit by the power cord or the 

cord of the remote control unit.

For a brief demonstration of the features of the 

Massage Seat, press the

 DEMO

 button. The unit 

will start a cycle of kneading back massage. Once 

complete the unit automatically turns off.

Preparing the units for your first time use

 

The  

Massager

 comes with 2 screws located 

on the back of the unit to protect the unit’s 

mechanism during shipment. These screws must 

be removed before the first use to avoid damage. 

Use the provided allen key to remove the screws 

and  then  use  the  provided  black  plug  to  fill  the 

hole. Dispose the screws appropriately.

When using the unit for the first time, you will hear 

a “pop” sound. This indicates that the secure lock 

has been unlocked. This only happens when the 

unit is used for the first time.

 CONNECTING TO MAINS

 SEAT MASSAGER

 DEMO MODE

Connect power adaptor to mains. 

Connect the DC jack to the power adaptor.

 TURNING ON THE MASSAGER

  CHOOSING MASSAGE ZONES

  MASSAGE WITH HEAT FUNCTION

Press the 

POWER

 button to turn the unit on. 

The LED indicator light will illuminate and 

confirm you selection. 

To turn off the massager, press the 

POWER

 

button again. The LED indicator light will blink 

while the massage nodes are returning to the 

starting position. 

After chosen the massage program, press the 

HEAT

 button to turn on the heat function. The 

corresponding LED indicator light will turn on. 

Press the same button to deselect the heat 

and the LED indicator light will turn off. 

WARNING

WARNING

Do not pull the power cord or wrap it around 

the unit.

Do not sit on the power cord.

1.

2.

WARNING

         The massage mechanism always returns 

to the starting position when the massage course 

ends and when the unit is turned off at the control 

panel. If the electrical supply is interrupted, when 

the power restores, the mechanism will go back to 

the original point before a new massage begins. 

Press 

POWER

 to begin a new massage.

              For your safety, the heat function cannot 

be turned on alone without any massage program 

chosen.

         The massager will turn off automatically 

after 15 minutes operation to prevent the unit 

overheating.

NOTE

NOTE

NOTE

EN

  RECOMMENDED MASSAGE TIME

Generally, a back massage could take up to 15 

minutes. You may choose to use it once or twice 

daily as needed.

If you have any doubts or concerns, always 

consult your doctor.

Отзывы: