5
GB
OUTDOOR
INDOOR
RESET
MIN
MAX
INDOOR
OUTDOOR
SCREW
OUTDOOR
SENSOR
PROBE
ATTACHMENT
WIRE
Note:
Locate the outdoor sensor probe away from
direct sun light and heavy precipitation.
MAINTENANCE
When handled properly, this unit is engineered to give
you years of satisfactory service. Here are a few product
care instructions:
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft
lint-free cloth.
2. Do not clean the unit with abrasive or corrosive
materials.
Abrasive cleaning agents may scratch
the plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged
batteries, or distorted parts.
4. Do not tamper with the unit’s internal components. Doing
so will terminate the unit’s warranty and may cause
damage. The unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction
manual. Do not mix new and old batteries as the old
batteries may leak.
6. Read this instruction manual thoroughly before operating
the unit.
FREE STAND AND WALL
MOUNTING
Stand:
Flip out the plastic stand on the rear of the Thermometer for
table standing. Stand the Thermometer on a flat surface.
Wall Mount:
You can mount your Thermometer on a wall by using a
screw (not included) with the screw head extending about
3.5 mm from the wall.
Notes:
For accurate measurement,you should mount the
Thermometer in an area where air can flow
freely around it.