EN
2
GETTING STARTED
BATTERIES
This unit operates with 2 x CR2032 batteries.
Insert batteries before first use, matching the polarity as
shown in the battery compartment.
shows the batteries are low.
CHANGE SETTINGS
1.
Press and hold
MODE
for 2 seconds to enter setting
mode.
2.
Press
+
or
–
to change settings.
3.
Press
MODE
to confirm.
TABLE STAND OR BELT CLIP
You can wear the belt clip on your belt or use it as a
stand. To use the belt clip as a stand, remove the belt
clip from the back of the monitor. Insert the left or right
side of the clip into the lower part of the slot then snap
the other side of the clip into the other lower slot.
NOTE
NOTE
NOTE
CLOCK
This product shows the current time, and day-of-week
in English, French, German, Italian, or Spanish.
SET CLOCK
1.
Press and hold
MODE
for 2 seconds. The Clock
Area will blink.
2.
Select the time zone, hour, minute, year, month,
day, and language. Press
+
or
–
to change
the setting. Press
MODE
to confirm.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish.
The time zone options are (PA) Pacific,
(CE) Central, (MO) Mountain, and (EA) Eastern.
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds and
Clock with Weekday display.
ALARMS
This product is equipped with a 2-minute alarm.
VIEW ALARM SETTINGS
Press
ALARM
. The Alarm Time and
((.))
icon will show in
the Clock Area.
