GB
3
INFORMATION CONCERNING THE CE
SYMBOL
This device complies with the European regulations based on the
Medical Products Code, and bears the CE mark “CE0123”. The
device has been quality inspected according to EG guideline
93/42/EWG and tested in compliance to the EN1060-1
Non-invasive sphygmomanometers-Part 1, General requirements
and EN1060-3 Non-invasive sphygmomanometers-Part 3:
Supplementary requirements for electromechanical blood
pressure measuring systems. It is therefore not subject to
calibration regulations and does not bear a calibration stamp.
The CE mark further indicates that this blood pressure monitor
meets the general requirements for electronic products as regards
resistance to electromagnetic interference. Malfunctioning may
however occur in the proximity of extremely strong
electromagnetic fields.
In accordance with the “Ordinance for Operators of Medical
Products”, a technical inspection must be carried out if this
device is used for industrial or commercial purposes.
WRIST TYPE BLOOD PRESSURE
MONITOR
MODEL: BPW128
USER’S MANUAL
INTRODUCTION
Thank you for purchasing the Wrist Blood-Pressure Monitor
(BPW128). This unit has been constructed using reliable circuitry
and durable materials. Used properly, this unit will provide years of
satisfactory use.
Before use please note:
-
This device is intended for non-invasive measuring and
monitoring of arterial blood pressure. Designed for use on
the wrist, it is not intended for use on other extremities or
for other functions other than obtaining a blood-pressure
measurement.
-
If the cuff pressure exceeds 300mmHg, this unit will
automatically deflate. Should the cuff not deflate when
pressures exceeds 300mmHg, the user is required to detach
the cuff from the wrist.
-
Do not begin medical treatment based solely on obtained
measurement values from this device. Consult a physician
for treatment advice.
-
To avoid measurement errors, read this manual carefully
before use
.
