EN
6
CONNECTION SIGNAL STATUS
The connection icon will show you the status of the
signal between the units.
LOST-LINK ALARM
When the parent unit cannot receive data from the baby unit
(due to interference or out-of-range distance), an alarm will
sound and will flash. The temperature reading will display
as “- - -”. The alarm sound will stop only when the connection
between the two units is linked again.
TEMPERATURE DISPLAY
The baby unit measures the surrounding temperature. If
“- - -” is displayed, the baby unit cannot transmit the
temperature reading.
Slide the
°
C /
°
F
switch in the parent unit battery compartment
to your desired setting.
CLOCK / ALARM
Press to toggle between the clock and alarm display.
You may need to experiment with various locations to get
the best reception.
SELECT CHANNELS – BABY UNIT
You can change the channel (if there is interference or problem
linking the 2 units) by pressing on the baby unit.
NIGHTLIGHT – BABY UNIT
Press to turn the nightlight ON / OFF.
CHANGE VOLUME
To change the volume (0-5), press + / - on the parent unit. 0
= mute and 5 = high volume.
NOTE
All alarm sounds are independent of the volume level.
NOTE
You may hear a high pitched noise if the parent unit
is placed too closely to the baby unit. The noise will stop
sounding once the units are moved away from one another.
SOUND LIGHT INDICATORS
The sound light indicators on the parent unit can alert you
visually to a baby’s sound. The louder the sound received
from the baby unit, the more lights will be on.
LOST LINK
NORMAL SIGNAL
(The graphics are animated
when the 2 units are linked.)
%00B%%5(15
11/28/2005, 12:05 PM
6
