6
EN
LOST LINK ALARM
When the Parent Unit cannot receive data from the Baby
unit (due to interference or out-of-range distance), lost
link alarm will be on. The reception strength tower will be
blinking and alarm sound will go off for 2 minutes. Re-
position the units. The alarm sound will stop automatically
once signal is received again or you can press any key to
stop the alarm sound.
If signal cannot be received after the 2-minute alarm, the
tower icon will continue to flash.
KEY LOCK
This function is used to prevent accidental key-press on
the Parent Unit. Press and hold CHANNEL and TEMP
together for 3 seconds to activate/ deactivate the key-
lock function.
TEMPERATURE AND HUMIDITY
The baby unit can measure the surrounding temperature
and relative humidity. The measured data can then be
transmitted to and displayed on the Parent Unit.
Temperature is shown on the 2
nd
line and the humidity is
shown on the 3
rd
line.
ºC/ ºF UNIT
Press the …C/ …F button inside the battery compartment of
the Parent unit to change the temperature display unit in
degree Celsius or Fahrenheit.
COMFORT INDICATOR
By calculating both the temperature and humidity together
a baby-face comfort indicator will be shown so that you
will know if your baby feels comfortable, hot or cold in the
room.
Above
26.1ºC
(79ºF)
19.1 - 26.0
ºC
(66.4ºF -
78.8ºF)
Below
19.0ºC
(66.2ºF)
55%-
75%
Above 75%
Below 55%
