11
GB
HOW TO RESET THE UNIT
The RESET slot allows you to return all settings to factory values.
Accessing the slot is required only when the unit is not operating
in a favorable way such as in the rare case of a malfunction.
The RESET slot is located inside the battery compartment door. To
use the button,
1. Lift open the battery compartment door.
2. Place a blunt stylus into the slot and press.
3. Replace the battery compartment door.
MAINTENANCE
When handled properly, this unit is engineered to give you years
of satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
with water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials.
Abrasive cleaning agents may scratch the plastic parts and
corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
4. Do not tamper with the unit’s internal components. Doing so
will terminate the unit’s warranty and may cause damage. The
unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may leak.
6. Read this instruction manual thoroughly before operating the unit.
SPECIFICATIONS
Temperature Measurement
Main unit
Indoor Temperature measurement
Proposed operating range
: -5.0°C to +50.0°C
(23.0°F to 122.0°F)
Temperature resolution
: 0.1°C (0.2°F)
Relative Humidity measurement
Measuring Range
: 25% RH to 95% RH
at 25°C (77°F)
Resolution
: 1% RH
Remote unit
Temperature measurement
Proposed operating range
: -20.0°C to +60.0°C
(-4.0°F to 140.0°F)
Temperature resolution
: 0.1°C (0.2°F)
RF Transmission Frequency
: 433 MHz
No. of Remote unit
: Up to 3 units
RF Transmission Range
: 30 meters
Temperature sensing cycle
: around 40 seconds
913hg-e.p65
07/12/2001, 3:06 PM
11
