EN
6
Outdoor data is collected and displayed every 40 seconds.
Indoor data is collected and displayed every 10 seconds.
SELECT TEMPERATURE UNIT
Slide the
°
C /
°
F
switch into the desired location. The
switch is located in the main unit battery compartment.
The setting for the main unit overrides the remote sensor
setting.
SELECT CHANNEL NUMBER
Press
CHANNEL
to switch between sensors 1-3.
The icon shows the selected sensor.
To auto-scan between sensors, press and hold
CHANNEL
for 2 seconds. Each sensor’s data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL
or
MEM
.
NOTE
If you use a sensor that collects only temperature
data, humidity will not be shown.
NOTE
For more information on the sensor see “Remote
Sensor THGR122NX” section.
MINIMUM / MAXIMUM RECORDS
The
MEM
button is located in the main unit battery
compartment. Press
MEM
to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold
MEM
for 2 seconds. A beep
will sound to confirm that the memory has been cleared.
MOON PHASE
The Calendar must be set for this feature to work, see
“Set Clock” section.
• Press or to view the moon phase for the next or
previous day.
• Press and hold or to scan quickly through the
years (2001 to 2099).
KINETIC-
WAVE
ICON
DESIG-
Indoor
Remote
Remote
Remote
NATED
Display
Display
Display
Display
DISPLAY
Channel 1 Channel 2 Channel 3
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds and
Clock with Weekday display.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press . The alarm time and alarm status will show in
the Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press or to change
settings. Press to confirm.
ACTIVATE ALARM
Press to activate or deactivate the alarm. shows in
the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
• Press
SNOOZE
to silence it for 8 minutes.
OR
• Press any key except
SNOOZE
to mute the alarm and
activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
SUNNY
PARTLY
CLOUDY
RAINY
CLOUDY
TEMPERATURE AND HUMIDITY
This product can display current, minimum, and maximum
temperature and humidity percentage information
collected by the remote sensors and main (indoor) unit.
BAR638HG_M_EN_6.p65
2005.4.27, 10:56 PM
6
