4
EN
UNIT
LOCATION
Main
Indoor Temperature Area
Remote
Outdoor Temperature Area
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
Main unit
3 x UM-3 (AA) 1.5V batteries
Remote unit
2 x UM-4 (AAA) 1.5V batteries
Insert batteries before first use, matching the polarity (+
and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press
RESET
after each battery change.
NOTE
Do not use rechargeable batteries.
shows when batteries are low.
NOTE
It is recommended that you use alkaline
batteries with this product for longer performance.
Installing the batteries:
CHANGE SETTINGS
To change, time, calendar and language settings:
1. Press and hold
MODE
for 2 seconds to enter
setting mode.
2. Press
or
to change settings. (To reach the
setting you want quickly, press and hold
or .)
3. Press
MODE
to confirm.
TABLE STAND OR WALL MOUNT
Use the stand on the back of the main unit / remote
sensor, or mount it on a wall with a nail.
Attaching the stand:
Using the wall mount:
Using the remote sensor stand or wall mount: