10
EN
To force a manual search for clock signals, press and
hold for 2 seconds. If no signal is found, check the
batteries.
TURN CLOCK ON / OFF
Perform this step if you cannot receive clock signals.
Press and hold for 2 seconds. Then, manually set the
clock following the
“Set Clock”
instructions (below).
The signal icon indicates that the clock feature is
ON. No icon means that it is OFF.
Once complete, the reception icon will stop blinking. The
icon is shown in the Clock Area.
STRONG SIGNAL
WEAK SIGNAL
NO SIGNAL
SEARCH FOR SENSOR
To search for the sensor, press and hold
SEARCH
for 2
seconds.
NOTE
If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
NOTE
Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.
CLOCK
The clock automatically synchronizes the current time
and date when it is brought within range of the radio
signal DCF77 generated from Frankfurt, Germany for
Central Europe (model BAR623P) or MSF60 generated
from Rugby, England (model BAR623PU).
NOTE
The signals are collected by the main unit when
it is within 1500 km (932 miles) of a signal.
Initial reception takes 2-10 minutes, and is initiated when
you first setup the unit, and whenever you press
RESET
.
BAR623P_EN_R2.p65
7/27/04, 12:40 AM
10
