Oregon Scientific BAR386, Руководство пользователя

Страница: 96 / 124

EN
6
SENSOR DATA TRANSMISSION
The sensor reception icon in the remote sensor area
shows the status.
To search for a sensor:
Simultaneously, press and hold MEM and CHANNEL
for 2 seconds.
NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
ICON DESCRIPTION
and "- - . -"
(Outdoor
temperature area)
The sensor cannot be found.
Search for the sensor or check
batteries
A channel has been found
and sensor signal is being
received
Main unit is searching
for the sensor(s)
CLOCK
SET CLOCK
To set the clock:
. Press and hold MODE for 2 seconds.
2. Press or to change the settings.
3. Press
MODE to confirm.
4. The settings order is: hour, minute, year, month, day
and language.
NOTE The language options are (E) English, (D) German,
(F) French, (I) Italian, and (S) Spanish.
Press MODE to choose between the clock with seconds
and clock with weekday display modes.
ALARM
To set the alarm:
. Press and hold ALARM for 2 seconds.
2. Press / to set hour / minute.
3. Press
ALARM to confirm. indicates alarm is ON.
To toggle alarms ON / OFF:
. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm ON / OFF.
To silence the alarm:
•
Press SNOOZE to silence it for 8 minutes.
OR
•
Press any key except SNOOZE to turn the alarm off
and activate it again after 24 hours.
P/N: 300100700-00008-10 REV1
8/36