EN
13
The house icon
indicates that the
radio-controlled
clock is ON. No
icon means that it
is OFF.
SET CLOCK
You only need to do this if you have disabled the radio-
controlled clock, or if you are too far from a RF signal.
1.
Press
SELECT
to navigate to the Clock Area.
will show next to the Area.
2.
Press and hold
MODE
for 2 seconds.
3.
Select the 2
nd
time zone offset hour (+/-23 hours),
12/ 24 hour format, hour, minute, year, date/month
format, month, date, and display language, and
(optional) volume level for the Audio Broadcast.
Press
UP
or
DOWN
to change the setting. Press
MODE
to confirm.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish. The
language you select determines the weekday display
and the spoken language for the Audio Broadcast.
Audio Broadcast must be activated (
19)
before you can set the volume level. The number of bars
shown after the speaker icon (
) at the BOTTOM of
the display indicates the level (Low, Medium, or High).
ALARMS
This product has 2 alarms: the Daily Alarm and a Pre-
Alarm for snowy weather. The Daily Alarm can be set to
go off at the same time every day and you can select
either Beep or Talking Alarm. The Pre-Alarm sounds only
when the Daily Alarm is activated and the recorded
temperature from Channel 1 Sensor falls to 2
°
C
(35.6
°
F) or below.
SET DAILY ALARM
1.
Press
SELECT
to navigate to the Clock Area. will
show next to the Area.
2.
Press
ALARM
/
to view the Alarm. (AL will show
at the top.)
3.
Press and hold
ALARM
/
for 2 seconds.
4.
Select the hour and minute. Press
UP
or
DOWN
to
change settings. Press
ALARM
/
to confirm.
NOTE
NOTE
BAR321/323HGN English R3 R
3/27/04, 11:25 AM
13
Black
